5G Shielding Paint EMF-Turtal (indoors)

€  236

Delivery time for pre-orders are normally from 3-10 days

Bli den første som omtaler dette produktet

Filer for nedlastning

Oversikt

5G Shielding Paint EMF-Turtal indoors
EMF Turtal 5G Protective Shielding Paint - Nontoxic Graphene Technology
Latest patented graphene technology. Successfully shields against 3G, 4G, and 5G millimeter wave.

  • Shielding properties are at the highest level, with up to 64dB at 40 gigahertz (99.999% effective).
  • Nontoxic, no chemical ingredients or solvents.
  • Not temperature sensitive, does not need to be protected from frost.
  • Easily applied by anyone with a standard paint roller.
  • Simply mix the powdered contents of package with water.
  • May be stored indefinitely (prior to mixing and use).
  • Efficient shielding of HF and LF loads
  • Especially fast drying time

We rely on innovative graphene technology. For our product EMF-TURTAL we use the principle of Faraday shielding. This principle is an arrangement known as Faraday cage and is used today in electrical engineering for shielding of electrostatic fields. Thus EMF-TURTAL efficiently shields: 5G, LTE, WLAN, and other HF as well as LF loads with shielding values of 29 dB-58 dB (with 2 layers! depending on layer thickness and frequency). We offer our product EMF-TURTAL PLV as a fine powder which must be mixed with water by the customer himself. EMF-TURTAL PLV 2.5 is offered as 1.200 kg container, which, when added to water, produces 2.50 – 2.75 liters of ready-to-paint shielding paint, sufficient for about 10 – 12.5 m² (depending on the substrate for a painted layer).

Advantages of EMF-TURTAL PLV Shielding powder
The advantages of EMF-TURTAL PLV are, among others, the use of the special properties of graphene, the fast drying time and a pleasant working without chemical solvents, which makes our PLV product very low in emissions. As our product must be mixed with water by the end user to prepare it ready for use, we have outsourced a complete work step and can therefore set our end user price lower. We deliberately avoid chemical additives such as antifreeze and solvents.

Description
Our carbon based 5G shielding paint PLV has many advantages, high frequency radio exposure of mobile phones, mobile internet, 5G, WLAN, DECT, GSM, LTE, etc. are shielded highly efficiently and reliably. The electrical fields of the domestic low-frequency current (alternating current) are grounded and can be almost completely shielded or discharged. This 5G shielding paint PLV 2.5 is based on pure acrylate, graphite, and graphene technology. We offer the paint in powder form so that it is largely frost-resistant and can be stored for several years without losing its properties. An easy to apply, high yield shielding paint. It only needs to be mixed with 1.5 liters of water for 10 minutes with a stirrer and a drill (cordless screwdriver) according to the instructions. The yield of the paint on smooth and primed surfaces is 5.0m² per liter (for one painted layer) and 2.5m² per liter (for two painted layers). Particularly time-saving due to the short drying time and after a few hours (through-drying) it can be painted over with most commercially available wall paints without any problems (see enclosed processing instructions). Shielding effectiveness / 500 MHz to 40 GHz. The shielding attenuation values (1-layer, 2-layer) measured by an independent expert can be found in the linked expert opinion. We recommend (depending on the radiation exposure on site) to always protect yourself with at least two coats of paint. All shielding attenuation values given apply to frequencies from 500 MHz to 40 GHz and were measured in an expert opinion by Professor Pauli in Munich. Measurement location: at the measurement stand of the University of the German Armed Forces in Munich.

Strong shielding performance at 5G
Thanks to many years of intensive research work and innovative product development, our 5G shielding paint PLV 2.5 (powder) has a shielding effectiveness in a very wide frequency range (from low-frequency to high-frequency radiation). The strength of our shielding paint lies mainly in the shielding of the - in future often used - extremely high frequencies as with 5G. Since the product launch in 2019 this includes the two 5G frequency spectra FR1 (600 MHz to 6 GHz) and FR2 (24GHz to 40 GHz).

Shielding performance up to 40 GHz
We have an independently prepared, external expert opinion from a longtime renowned expert for high-frequency radar and microwave technology (Prof. Pauli, former University of the German Federal Armed Forces). From this independent expert opinion, you can see the shielding values from 500 MHz up to 40 GHz.

 

Detaljer

Technical data:
Fire behavior: This product is flame-retardant. Further details can be found in the enclosed safety data sheet.
Application: Ceiling, interior wall
Contents: One pack of PLV 2.5 (powder) with the addition of 1.5 liters of water gives 2.50 liters of shielding paint ready to spread (for self-mixing).
Packaging volume: Per 2.5 liter unit
Dimensions per stand-up pouch: 34.0 cm (height) x 25.0 (width) x 10.0 cm (thickness) filling weight: 1.100 g
Substrate: Excellent adhesion to almost all substrates such as old paint, plasterboard, wallpaper, plaster, concrete, polystyrene, wood (unpainted), etc.
Further details can be found in the processing data sheet. Can be painted over: Should preferably be painted over with dispersion paint for interior use. Do not use wallpaper ABOVE the shielding paint, as the adhesive could dilute it and reduce its protection and the adhesion of the wallpaper to shielding paint is not recommended or guaranteed by us. In any case, avoid all clay-based paints. For natural or biological silicate emulsion paints, lime, and casein paints, we recommend that you always carry out a test before use, as not all paints adhere to graphite / graphene in the same way! We do not recommend pure mineral paints (clay, pure silicate).

Connection: Must be earthed to remove electric fields (recommended in any case)! We recommend the use of a grounding kit and a grounding plug for indoor use, which you can find in our shop,
Color: anthracite-black
Field type: LF (extremely low-frequency alternating electric fields), HF (high-frequency electromagnetic fields)
Ingredients: pure acrylic binder, graphite, graphene
VOC content: 0.2 g/l (the EU limit value for category A/a has been 30 g/l since 2010)
Adhesive tensile strength: 2.2 N/mm² with the addition of 1.5 liters of water for PLV 2.5 (powder).
Storage: After mixing the powder with water, we recommend to apply the paint within approx. 6 weeks.

Important: Always mix a complete bag of PLV 2.5 (never use only a part of the packaging), as heavier particles settle at the bottom during transport. Always stir again before each use, also stir again for 5 minutes before applying the second layer, as particles can settle in the bucket during the drying time of the first layer! Please observe the safety and processing instructions enclosed with the product!

Special advantages: Highly efficient, reliable shielding for 5G protection

 

Skriv din egen omtale

Kun registrerte brukere som har logget inn kan skrive omtaler. Vennligst log inn eller register deg!

Produkttagger

Bruk mellomrom for å skille tagger. Omgi setninger med apostrof (').

Tilleggsinfo

manufacturerNei
MomsklasseMomspliktige varer 25%

This is the replacement of Upsell Products